We accept all major credit cardsWe accept PayPal

VAT Mode:
N000000L053A, Cambium Networks 56 VDC DIN-Rail Power Supply for CMM4, LWN1740-6EM1 (replaces SGPN4076)

N000000L053A, Cambium Networks 56 VDC DIN-Rail Power Supply for CMM4, LWN1740-6EM1 (replaces SGPN4076)

N000000L053A, Cambium Networks 56 VDC DIN-Rail Power Supply for CMM4, LWN1740-6EM1 (replaces SGPN4076)

E-mail this product to a friend E-mail this product to a friend

Previous  Up  Next" 

* RoHS lead-free-solder and lead-solder-exempted products are available
* Rugged 35 mm DIN-rail snap-fit design
* Class I equipment
* Universal AC-input or DC-input (66 - 150 or 90 - 350 VDC) with single stage conversion
* Power factor correction, harmonics IEC/EN 61000-3-2
* Virtually no inrush current
* Immunity to IEC/EN 61000-4-2, -3, -4, -5, -6, -8, -11
* Emissions according to EN 55011/022
* Very high efficiency; up to 89%
* Short-term output peak power capability, rectangular current limiting characteristic
* Single or two independently regulated outputs with 12, 24, 36, or 48 V
* Outputs no-load, overload, and short-circuit proof
* PCBs coated by protective lacquer
* Very high reliability
DIN-rail mountable DC-DC and AC-DC converters with power factor correction. The converters have been designed according to the latest industry requirements and standards. The converters are ideal for use in outdoor and other demanding applications to power building control systems, factory automation, industrial controls, instrumentation, electromagnetic drives, fans, and other DC loads. Different models are available with a single output or two independently regulated, electrically isolated outputs with 12,
24, 36, or 48 V. Special models for battery charging are available. The EW models are particularly suitable for 110 V railway applications; they have been designed in accordance with the railway standards EN 50155 and EN 50121.
Key features of the Convert Select line include power factor correction with low harmonic distortion, negligibly low inrush current, high immunity to transients and surges, and low Safety-approved to IEC/EN 60950-1 and UL/CSA 60950-1 2nd Ed., UL 508 listed components electromagnetic emissions. Internal protection circuits such as input over- and undervoltage lockout, thermal protection, as well as output overvoltage protection by a second control loop ensure safe operation of the final system.
The outputs deliver an electrically-isolated Safety Extra Low Voltage (SELV) and low output noise. They are no-load, overload, and short-circuit proof. The electronically controlled short-term peak power capability of up to 150% of the rated output power enables the front end converters to deliver additional power to start-up motors or to safely operate subsequent circuit breakers. Built-in large sized output capacitors absorb possible reverse energy, which may be caused by quick deceleration of electromagnetic drives connected directly to the output. A green LED at the front cover displays the status of the output(s).
The Convert Select Series was designed according to all relevant international safety standards. The converters are approved by T&V and UL, and are UL 508 listed. Adequate clearances and creepage distances allow operation in pollution degree 3 environment (with AC input). All board assemblies are coated with a protective lacquer.
The thermal concept allows operation at full load up to an ambient temperature of 60deg.C (LW models) or 70deg.C (EW models) in free air without forced cooling. A rugged DIN snapfit device allows easy and reliable fixing onto the various 35 mm DIN rail models. The converters are fitted with cage clamp terminals which are easily accessible from the front. System connectors with screw terminals for use with preassembled harnesses, external adjustment of the output voltage as well as various auxiliary functions are available as options.
The letter E stands for improved EMC performance of LW models. Models without E are obsolete.

SKU: N000000L053A
Regular Price: $795.00
 On Sale For: $636.00